Pitch Systems in Wind Turbines – Reducing Load and Enhancing Turbine Safety

CleanTechies Guest AuthorPublished on Date April 11th, 2012 by CleanTechies Guest Author
Posted in Category Europe, Category Wind
Tags1 Comment »
Rating: 5.0/5
advertisement

All wind turbines are equipped with a certain power control feature in case the speed of the wind is too high or too low and to have a frequency coherent with the grid. The traditional and the simplest and least expensive method in this respect is a system of natural limitation known as “stall”. The blades are mounted directly on the hub at a fixed angle. When the wind speed is higher than the operational speed, the blades begin to stall.

This system regulates the power by stalling the blades when a rated power is attained. It is simple and relatively reliable, but it misses precision because it depends on the air density and of the roughness of the blades.

The second method modern wind turbines use to control power is the pitch-controlled system, which is very precise; it can control and adjust the angle of the blades several times per second if necessary. Blade pitch control is, therefore, the system which, by regulating the blade pitch angle, turns (pitches) the blades so they can take maximum advantage of the wind and, at the same time, in case of very high wind speed it functions as a brake, adjust the angle blade so that the wind goes through. Also, the increased interest in pitch system is given by the increase of the rotor size.

As mentioned above, these pitch systems continuously control the speed, when it is too high they lower the blade speed rotation and in case of low wind speed they increase the rotation speed. Therefore, pitch systems are extremely useful; they “improve the efficiency of wind energy conversion and power generation stability” . Pitch systems are usually equipped with an electrical motor, a gearbox and an electro-mechanic actuator. There are two types of pitch systems: hydraulic and electromechanical.

Article by IQPC is a leading organizer of about 2,000 worldwide conferences, seminars, and related learning programs every year. The company is organizing the 2nd International Conference E/E Systems for Wind Turbines 21 – 23 May, 2012 at the Swissôtel Bremen, Germany. Free whitepapers, articles and podcasts on grid integration of offshore wind energy are available on the website.

Pitch Systems in Wind Turbines - Reducing Load and Enhancing Turbine Safety, 5.0 out of 5 based on 1 rating


photo: Everyspoon.

WP Greet Box icon
Welcome to the CleanTechies Blog! If you are new here, you might want to subscribe to the RSS feed or via email for updates on this topic.
Share and Bookmark:
  • RSS
  • email
  • Print
  • Digg
  • LinkedIn
  • Twitter
  • Facebook
  • del.icio.us
  • Mixx
  • Google Bookmarks
  • FriendFeed
  • Identi.ca
  • NewsVine
  • StumbleUpon
  • Technorati
  • Wikio
  • Yahoo! Buzz
  • PDF
VN:F [1.9.4_1102]
Rating: 5.0/5 (1 vote cast)


One Comment to “Pitch Systems in Wind Turbines – Reducing Load and Enhancing Turbine Safety”

Leave a Reply

XHTML: You can use these tags: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <strike> <strong>

Please note: Comment moderation is enabled and may delay your comment. There is no need to resubmit your comment.

Additional comments powered by BackType

 
Vote Solar
Cleantech Law Partners
GRID Alternatives
      Home  |  About  |  Subscriptions  |  Advertise  |  Press  |  Affiliate  |  Contact  |  Terms of Use  |  Privacy Policy  |  Sitemap
      Copyright © 2008-2013 CleanTechies, Inc. - All rights reserved
Time needed to produce page: 1.137